Top-quality features!

• Controlled steam release after sterilization to avoid overboiling of the liquid products.
• Programmable start time.
• Warming function to a presetable temperature of 25 – 80 °C after sterilization.
• Autofill for demineralised water.
• Special cleaning programme.
• Waste program with pulsed heat up for waste sterilization in waste bags to optimise air removal out of waste bags.
• Process control via state-of-the-art microprocessor technology
• 6 individual programs standard
• LCD display for pressure, temperature, time and errors
• Sterilization parameters – Temperature and time are freely selectable; temperature can be set between 60 and 138 °C. Sterilizing time can be set from 1– 99 minutes. Preselected parameters remain programmed until altered.
• Sterilization initiation - A PT 100 temperature sensor in a reference vessel guarantees that the set sterilization temperature is actually attained before sterilization starts.
• RS 232 Interface– For connection to an external computer
• Demineralised water level regulation– Feed water for steam generation is automatically regulated.
• Exhaust steam condensation– Exhaust steam is cooled down before leaving the autoclave. No unnecessary steam is exhausted. Drainage equipment protected from contact with steam.
• Heat-resistant plastic covering on lid– Prevents contact with hot parts and protects from burning.
• Temperature and pressure regulation– Both parameters are included in the control process, hence guaranteeing an absolutely safe sterilization procedure.
• Pre-prepared for fitting a printer – Space and electronics are available for the retrospective fitting of a printer for documentation purposes. Fitting is hence easy and inexpensive.
• Pre-prepared for cooling – The autoclaves are prepared for the retrospective fitting of cooling equipment.
• Validation port – Ports are available for external temperature sensors for validation and qualification purposes.

Safety first! The safety aspects:

• Pressure-dependent door lock – Prevents the door from being opened whilst under pressure.
• Temperature-dependent door lock – In conjunction with temperature measurement in a reference vessel, the system prevents the door from being opened until the temperature is below a specified level, hence preventing delayed boiling (as specified by technical regulations for pressure vessels, complies with British- and German Standards).
• Door lock safety switch – Prevents the sterilization programme from being started if the door is not properly closed.
• Water level safety device – Prevents the autoclave from being heated up if insufficient water is available for steam generation.
• Excess temperature safety device – Switches off the heating elements if too high a temperature is attained.
• Overpressure valve – release of too high pressure.